£995.00
Pair of rolling ladder feet with lever brake (for timber ladders), in polished brass
*Plus VAT & Delivery to most UK destinations
Our Ready-to-go designs, are designs that we have spent many years refining. We can also apply our experience and craftsmanship to creating a design just for you through our Bespoke service.
Why not contact us to discuss your ideas and requirements, we would be happy to create a bespoke design to your exact specifications.
A pair of solid brass rolling castor feet with integrated lever brakes for rolling ladders. Suited to timber or flat/square sided stringers (ladder sides), they are a braked version of our standard castor feet for rolling ladders. The lever brake can be applied using either the hand or the foot. Created entirely in house by our team, these items are made to order and are supplied in polished brass, handmade in our workshops in England.
Supplied with a backplate profile (straight with a chamfered edge) with either two counter-sunk screw holes (visible when looking front-on at the carriages) or blind-tapped holes (invisible from front view) in each foot (sold as a pair). Please indicate your preference upon ordering.
*Screws are not provided as it is necessary for the installer to choose the appropriate fixtures for the material the hardware is being attached to.
*Please note these rolling ladder feet are designed to manoeuvre a ladder only and are not designed to be ‘ridden’ on by a person whilst moving along a bookcase (for example).
Through our Bespoke service we can supply this item in alternative finishes including nickel plated brass (shiny silver), antiqued brass and bronze-coloured to name a few. Please contact us for further details.
| Material | |
|---|---|
| Finish | |
| Length (mm) | 185mm |
| Width (mm) | 30mm |
| Projection (mm) | 14.5mm at point where foot is screwed to ladder sides. 60mm projection from ladder sides to outside edge of castor wheel. 17mm allowance for brake lever. |
| Fixings | Blind-tapped holes (invisible from front), Countersunk screw holes (visible from front) |
